Friday, 25 November 2016

Wiko Lenny Dead After Flashing First Ever Solution with Tutorials By GsmJaker

How to Check a Damage Preloader
Corrupted or deleted phone preloader causes dead boot, to confirm the situation try the following:
  1. Open the Device Manager.
  2. Take battery out of the phone.
  3. Insert the USB and connect it to the PC.
  4. Insert the battery.
  5. Check if the computer is detecting any devices.
If it's not, then you have your phone's "Preloader" is missing, a clear case of a dead boot.
Repair a Dead Wiko Lenny
How to repair it? First, you need to disassemble the phone and take the mother board out of the framing. There should be a few golden small circles with corresponding labels such as RX, TX, GND, VCC, VCHARGE, DM, DX, and many more. These are referred as "test points" but among them we only need to locate a certain one to allow the Wiko Lenny to boot again on the computer.
Image of Repair a Dead Wiko Lenny

Wiko Lenny USB Dead Flashing 

 

 


1 comment:

Lenovo Vibe C2 (K10a40) ROM With NvRam File By Gsmjaker

 Brand     : Lenovo ProdName  : K10a40 ProdModel : Lenovo K10a40 Device    : K10a40 AndroidVer: 6.0 MTKxCPU   : MT6735 MTKxPRJ   : alps-mp-...