How To Unbrick Hard Bricked LG G3 All Variants

In this post i am going to share how to unbrick hard bricked LG G3 all variants. I have made some changes from original guide for better understand. you can repair you lg g3 any variant with this guide. After Read This Tutorial You Will Able To Fix These Situations in LG G3 mobile phones.

LG G3 Hard Bricked Conditions.

• LG G3 device that are unable to boot or dead boot fix,
• LG G3 Only Shows Qualcomm HS-USB QDLoader 9008,
• LG G3 won’t power on fix, LG G3 no recovery fix,
• LG G3 no download mode fix,
• LG G3 Shows LGE AndroidNet USB port fix,
• LG G3 LGE AndroidNet USB Modem,

LG G3 Hard Bricked Conditions with pictures.

So let’s start How To Unbrick Hard Bricked LG G3 All Variants Guide. If you have phone with these conditions LG G3 only shows Qualcomm HS-USB QDLoader 9008, LG G3 LGE AndroidNet USB Modem, or any witch is listed above.

LG G3 Hard Bricked Solution:

If You Are On Situation “LGE AndroidNet USB port” You To Need To Change “LGE AndroidNet USB port” To “Qualcomm 9008”

1- open the phone

2- On Mother Board Remove The Cover Of “eMMC”

3- Short test point with ground without the battery and Connect USB Cable Test points may be different in different boards so please search test point for you model or post in comments i will try to find for you.

After This Your Phone Shows “Unknown Device” In Device Manager So Install Qualcomn Driver Which Provided Below.

And Connect With PC With Out Battary

Now Fixing “Qualcomm HS-USB QDLoader 9008”

LG G3 Unbrick Requirements:

• QDLoader_HS-USB_Driver_32bit_Setup.zip
• QDLoader_HS-USB_Driver_64bit_Setup.zip
• BoardDiag_v2.99a_modified_by_willcracker.rar
• BoardDiag_v2.99a.zip [ Official ]
• LG G3 Official TOT Firmware.
• Make sure you have Visual C++ Redistributable Installed.

How To Unbrick LG G3 Hard bricked Phone

1-Install Qualcomn Drivers.
2-Extract Rar Of BoardDiag v2.99a And Run It.
3-Extract Zip Of ToT firmware file for your phone.
4-Make sure you have extracted Correct ToT File.
5-Put ToT file in BIN.
6-Set Directory (where ToT File Will Extract) DIR.
7-Click On Extract Button.

 

How to Extract LG Firmware Full Detail And Video Guide.

After Extraction TUT File You Will See  Files Like This

Then

1)Choose “Chipset” For G3 Choose B2
2)Select Correct COM Port Which Shows in Device Manager i.e, (COM8)
3)Select Source Of file Where ToT file Extracted
4)Tick Into “AP Test” And “EMMC TEST”
5)Click On Start

After Both Test Passed

Choose Restore Option And
Restore These Files One by One In this sequence
Note: Don’t Change the Sequence
1)Boot
2)Aboot
3)BackupGpt
4)Boot
5)dbi
6)laf
7)PrimaryGpt
8)Recovery
9)rpm
10)tz
11)sbl1

Finished

After Complete Disconnect Phone And Insert Battery
If Your Phone Boot Up You Have Success

Then Boot Into Download Mode And Flash ToT File With LG Flash Tool.

IF Get Success Then Press Like Button And Please Leave Comments If You Face Any Problem.

Source And Special Thanks To @WillCracker Form XDA Developers For Pictures Guide.

How to Restore Boot loader On LG G3 after bricked Full Videos Guide?